What are the Types of Network Topology?

-

What is a Network Topology?


Network Topology is the schematic description of a network arrangement, connecting various nodes(sender and receiver) through lines of connection.

Types of Network Topology

Bus Topology

Bus topology is a network type in which every computer and network device is connected to single cable. When it has exactly two endpoints, then it is called Linear Bus topology.


Features of Bus Topology

  • It transmits data only in one direction and every device is connected to a single cable.

Advantages of Bus Topology

  • It is cost effective, the cable required is least compared to other network topology, it can be used in small networks, it is easy to understand and it is also easy to expand joining two cables together.

Disadvantages of Bus Topology

  • When cables fails then the whole network fails, If network traffic is heavy or nodes are more the performance of the network decreases, the cable has a limited length, and it is slower than the ring topology.

Ring Topology

It is called ring topology because it forms a ring as each computer is connected to another computer, with the last one connected to the first. Exactly two neighbors for each device.

Features of Ring Topology

  • A number of repeaters are used for Ring topology with large number of nodes, because if someone wants to send some data to the last node in the ring topology with 100 nodes, then the data will have to pass through 99 nodes to reach the 100th node. Hence to prevent data loss repeaters are used in the network.
  • The transmission is unidirectional, but it can be made bidirectional by having 2 connections between each Network Node, it is called Dual Ring Topology.
  • In Dual Ring Topology, two ring networks are formed, and data flow is in opposite direction in them. Also, if one ring fails, the second ring can act as a backup, to keep the network up.
  • Data is transferred in a sequential manner that is bit by bit. Data transmitted, has to pass through each node of the network, till the destination node.

Advantages of Ring Topology

  • Transmitting network is not affected by high traffic or by adding more nodes, as only the nodes having tokens can transmit data and also Ring topology is cheap to install and expand.

Disadvantages of Ring Topology

  • Troubleshooting is difficult in ring topology, adding or deleting the computers disturbs the network activity,and the failure of one computer disturbs the whole network.

Star Topology

In this type of topology all the computers are connected to a single hub through a cable. This hub is the central node and all others nodes are connected to the central node.

Features of Star Topology

  • Every node has its own dedicated connection to the hub. The hub acts as a repeater for data flow and it can be used with twisted pair, Optical Fibre or coaxial cable.

Advantages of Star Topology

  • It has fast performance with few nodes and low network traffic and the hub can be upgraded easily. It is easy to troubleshoot, easy to setup and modify, and only that node is affected which has failed, the rest of the nodes can work smoothly.

Disadvantages of Star Topology


  • The cost of installation is high, it is expensive to use. If the hub fails then the whole network is stopped because all the nodes depend on the hub. The performance is based on the hub that it depends on its capacity.

Mesh Topology

It is a point-to-point connection to other nodes or devices. All the network nodes are connected to each other. 
There are two techniques to transmit data over the Mesh topology, they are :
  1. Routing
  2. Flooding

Mesh Topology: Routing

In routing, the nodes have a routing logic, as per the network requirements. Like routing logic to direct the data to reach the destination using the shortest distance. Or, routing logic which has information about the broken links, and it avoids those node etc. We can even have routing logic, to re-configure the failed nodes.

Mesh Topology: Flooding

In flooding, the same data is transmitted to all the network nodes, hence no routing logic is required. The network is robust, and the its very unlikely to lose the data. But it leads to unwanted load over the network.

Types of Mesh Topology

  1. Partial Mesh Topology : In this topology some of the systems are connected in the same fashion as mesh topology but some devices are only connected to two or three devices.
  2. Full Mesh Topology : Each and every nodes or devices are connected to each other.

Features of Mesh Topology

  • It is fully connected, robust, and not flexible.

Advantages of Mesh Topology

  1. Each connection can carry its own data load.
  2. It is robust.
  3. Fault is diagnosed easily.
  4. Provides security and privacy.

Disadvantages of Mesh Topology

  1. Installation and configuration is difficult.
  2. Cabling cost is more.
  3. Bulk wiring is required.

Tree Topology

It has a root node and all other nodes are connected to it forming a hierarchy. It is also called hierarchical topology. It should at least have three levels to the hierarchy.

Features of Tree Topology

  1. Ideal if workstations are located in groups.
  2. Used in Wide Area Network.

Advantages of Tree Topology

  1. Extension of bus and star topologies.
  2. Expansion of nodes is possible and easy.
  3. Easily managed and maintained.
  4. Error detection is easily done.

Disadvantages of Tree Topology

  1. Heavily cabled.
  2. Costly.
  3. If more nodes are added maintenance is difficult.
  4. Central hub fails, network fails.

Hybrid Topology

It is two different types of topologies which is a mixture of two or more topologies. For example if in an office in one department ring topology is used and in another star topology is used, connecting these topologies will result in Hybrid Topology (ring topology and star topology).

Features of Hybrid Topology

  1. It is a combination of two or topologies
  2. Inherits the advantages and disadvantages of the topologies included

Advantages of Hybrid Topology

  1. Reliable as Error detecting and trouble shooting is easy.
  2. Effective.
  3. Scalable as size can be increased easily.
  4. Flexible.

Disadvantages of Hybrid Topology

  1. Complex in design.
  2. Costly.

Source:







Comments

Post a Comment

Popular posts from this blog

How to be a Responsible Netizen

-
Image
To become a responsible netizen, you must know how to maintain good behavior online, to make use of the internet in good ways, and to respect others online. You must make sure that you are being good to others and that you are kind to all. Being a responsible netizen, you must know the good and bad things that can be done and to be a responsible netizen, you must avoid doing bad things and instead, do the good things like showing respect to others online and to know what things are not supposed to be done like cyber bullying. To become a responsible netizen, make sure that you are netiquette and that you show good traits towards everyone on the internet. Always be mindful of what you share like if you think that what you are about to share will hurt others then, then don't share it because if others were to do the same to you, you will feel hurt too. Before trusting some website or anything that can be found from the internet, make sure that the information is saf...
Read more

What is a Network Address?

-
Image
What is a Network Address? A network address is an identifier for a node or host on a telecommunications network. Network addresses are designed to be unique identifiers across the network, although some networks allow for local, private addresses or locally administered addresses that may not be unique. It is commonly known as IP Address. It is the numeric address of a computer connected to the network. It is a set of numbers called as "octets" or "dotted decimal notation" that identifies any network device. Two types of Network Address There are 2 different types of network addresses, one is a MAC (Media Access Control) address and the other one is an IP (Internet Protocol) address. The MAC address is a physical address and it exists on the Layer 2 (Data Link) of the OSI (Open Systems Interconnection). Layer 2 is also known as the Data Link Layer.  The IP address is a virtual address and it operates on Layer 3 (Network). MAC addresses are unique addr...
Read more

What are the Types of Computer Networking?

-
Image
What is a Computer Network? A  computer network  is a set of  computers   connected together for the purpose of sharing resources. The most common resource shared today is connection to the Internet. Other shared resources can include a printer or a file server. Common types of area networks are: 1. Personal Area Network (PAN) The smallest and most basic type of network, a PAN is made up of a wireless modem, a computer or two, phones, printers, tablets, etc., and revolves around one person in one building. These types of networks are typically found in small offices or residences, and are managed by one person or organization from a single device. 2. Local Area Network (LAN) We’re confident that you’ve heard of these types of networks before – LANs are the most frequently discussed networks, one of the most common, one of the most original and one of the simplest types of networks.  LANs  connect groups of computers and low-voltage...
Read more